AUDITORIUM AXS
Travers based auditorium stalls with double shell seat and fixed or folding tabletop.
Design: © Carsten Eichler, Neuenstein
AXS FIX
Travers based auditorium seats with double shell seat and fixed tabletop.
Seating units on continuous aluminum crossbar with fixed table on all-around welded table top support. Fastening of the seat units in a continuous groove in the aluminum hollow profile. Flexible cc-measurement between seats by releasing and moving the seat units. Front panel of the first row made of 15 mm birch multiplex covered with HPL. Supports made of steel tube 60/60 mm optionally with cut-out for BERKER power-sockets. With double walled seat, 60 mm thick, consisting of lower and upper shell made of molded beech wood and solid beech wood sides. Ergonomically shaped backrest made of molded beech wood up to 20 mm above the upper edge of the table top. Two tip-up pivots made of PA6-Z1 plastic with rubber-cushioned quadruple stop and shapely levers made of light metal die-cast with return spring per seat. Various design details and materials are selected and adapted for each project.
AXS PPA
Traverse-based lecture hall chairs with double shell seat and combined table unit made of a fixed and foldable desk top.
On a continuous aluminum beam and combined table unit with fixed and foldable part. Table top part that can be folded up and lasered and riveted folding fittings made of sheet steel with multiple stops in the angled fitting part. Above with an additional cross member under the fixed table top part over several seats and folding fittings type PPA screwed on.
Fastening of the seat units in a continuous groove in the aluminum hollow profile. Flexible cc-measurement between seats by releasing and moving the seat units. Front panel first row made of 15 mm birch plywood covered with HPL. Supports made of steel tube 60/60 mm with optional cut-out for BERKER sockets. With double shell seat, 60 mm thick, consisting of lower and upper shell made of molded beech wood and solid beech wood clamps. Ergonomically shaped backrest made of molded beech wood up to 20 mm above the top of the table top. Two swivel bearings made of PA6-Z1 plastic with rubber-cushioned quadruple stop per seat. Shapely bearing levers made of die-cast light
metal with return spring. Various design details and materials are selected and adapted for each project.